Garmin Mobile 20 Guida Utente

Select a location for the GPS 20SM. To receive satellite 

signals, place the GPS 20SM where it has a clear view 

of the sky. To communicate, the GPS 20SM must be 

within 10 meters (about 30 feet) of your mobile phone. 

Clean and dry the selected area of the windshield. 

➋

➊

➌

Snap the phone mount onto the suction cup 

mount. 
Place the suction cup on the windshield. 
Flip the lever back, toward the windshield. 

1.

2.
3.

To remove the phone mount from the suction cup 

mount, turn the phone mount as far as you can to the 

right or left. Apply pressure in that direction until the 

phone mount pops off the suction cup mount. 
To remove the suction cup mount, flip the lever toward 

you. Pull the tab on the suction cup toward you.

  NOte: If state or local laws prohibit the use of 

suction cup mounts, or if your phone opens vertically 

and the windshield has a steep angle, you may need 

to use the dashboard disk.

Important: The permanent mounting adhesive is 

extremely difficult to remove after it is installed. 

Select a location on your dashboard where the 

GPS 20SM will have a clear view of the sky. 
Clean and dry the selected area of the dashboard.
Remove the backing from the bottom of the disk.
Place the disk on the dashboard.
Place the suction cup mount on top of the disk. 

Flip the lever down (toward the disk).

1.

2.
3.
4.
5.