Garmin 96 Guida Utente

B

ASIC

 O

PERATION

 > 

The first time you power up your new GPSMAP 

96/96C, the receiver must collect satellite data and 

establish its present position. To ensure proper 

initialization, the GPSMAP 96/96C is shipped from 

the factory in AutoLocate mode, which allows the 

receiver to “find itself” anywhere in the world. Before 

you turn on the unit to start initialization, be sure 

that it has a clear and unobstructed view of the sky to 

receive satellite signals.

Press 

ENTER 

to acknowledge 

and show the 

Satellite Page.

1.  Press and hold the Power key. When the unit 

powers on, a tone sounds, and the first page 

appears.

2  After a few seconds, a Warning/Information 

Page appears. To acknowledge that you 

have read and understand the warning, press 

ENTER to continue.

3.  To turn off the GPSMAP 96/96C, press and 

hold the 

POWER key again.

  WARNING: When you agree with the 

statements on the Warning Page it is assumed 

that you understand that the GPSMAP 96 and 

GPSMAP 96C are intended as aids to navigation 

only. That the navigation information and 

obstacle data provided by the GPSMAP 96 and 

GPSMAP 96C is intended as an aid to situational 

awareness only. That it does not take precedence 

over accepted practices for safe navigation using 

Visual Flight Rules and that you have accepted 

the responsibilities and risks associated with 

using these devices.