Garmin 76s Manuale Proprietario

11

To activate the Options Menu from the GPS Information Page, press the 

MENU Key.  To select an option, highlight the desired selection then press 
ENTER.

Use With GPS On/Off — This option turn the GPS receiver On of Off.  Select 
this option if you are indoors and can not receive satellite signals, or if you 
wish to use only the sensors. If this option is selected, it will save battery 
power and allow the map to redraw faster.
Start/Stop Simulator — This option is used to Start or Stop the Simulator.
 Track Up/North Up — This option determines if the satellites are displayed 
with  the rings oriented with North toward the top of the display or your cur-
rent track toward the top of the display.
  New Location — if you have moved the unit to another state, province, or 
country, and you are having trouble locking onto satellite signals select ‘New 
Location’.  
 When you select ‘New Location’, an options menu will be displayed.  This 
menu contains the options ‘Automatic’ or ‘Use Map’.  If you select ‘Automatic’ 
the unit will switch to AutoLocate and begin searching for satellites. This 
method can take up to five minutes for the unit to begin navigation.
If you select ‘Use Map’ you can use the Pointer on the Map Page to select your 
approximate location and the unit will continue to acquire satellites normally 
using the almanac for satellite reference.  Using this method, the unit does not 
need to reinitalize and should receive satellite signals quickly.
If the unit is in the ‘Simulator’ mode, the ‘Use Map’ feature will allow you to 
move the simulated current location.

GPS Information Page Options