Garmin 76s Manuale Proprietario

34

ings. The Location, Estimated Accuracy, Elevation and Measurement Count 
will be displayed on the Average Location Page.  When you are ready to save 
the waypoint, with the ‘Save’ button highlighted, press ENTER.
Project Location —  When this option is selected the Project Location Page 
will be displayed.  The Project Location Page has four fields, ‘Location’, 
‘From’, ‘Distance’, and ‘Bearing’.  The ‘From’ field allows the user to select 
where they would like to project a waypoint from, the choices are ‘Current 
Location’, ‘Use Map’ and ‘Use Points Menu’.  After making a selection in the 
‘From’ field, a distance and bearing will need to be entered.  When finished 
entering the data, highlight the ‘Save’ button and press ENTER.  The data 
on the New Waypoint Page will now reflect the location of the projected 
waypoint.  To save the new waypoint, highlight ‘OK’ and press ENTER.
Sight ‘N Store —  When ‘Sight “N Store’ is selected a Compass Page will be 
displayed.  Line up the sighting marks on the case of the unit with and object 
the press ENTER.  You will need to enter an estimated distance to the object 
from your current location.  Selecting the ‘Bearing’ field will allow you to re-
sight.  To save the waypoint, press ENTER.  The ‘Sight ‘N Store’ data will now 
be reflected on the New Waypoint Page.  To save the waypoint, highlight the 
‘OK’ button and press ENTER.
Append To Route —  When ‘Append to Route’ is selected, a list showing the 
available routes or a ‘New Route’ selection will be displayed.  If you select an 

Sight ‘N Store

Append to Route