Garmin 76c Manuale Proprietario

List of Turns for an Active Route 

using the “Follow Roads” option

Preview of Turn 4 of 9 Turns on a 

Route

After you have created a route, you can begin navigation immediately 

or save it to the Saved Routes list as explained on page 41.

When you are navigating a route, a guidance message and graphic 

view of turns in the route will display as you approach each one. Using 
the “Follow Roads” option from the Routing Setup Page increases the 
number of turns and displays an Active Route page with a list of turns. If 
you selected the “Off Road” option you can view only the list of points for a 
route from the Active Route Page. (See Routing Setup on page 54.)

1. From the Routes Page, highlight the route from the Routes list. 

2. Press ENTER to display the Route Page for the route.

3. Highlight the “Navigate” button and press ENTER to begin 

navigation and display the route on the Map Page.

4. To view the list of turns on the route, press the PAGE key to 

display the Active Route Page. To view any individual turn on 
the list, use the ROCKER key to highlight it and press ENTER.

5. The page displays the turn and guidance text and a small fi eld 

at the bottom showing the turn number in sequence and total 
turns in the route.  To scroll through all turn previews, use the 
ROCKER key Up and Down arrows.  To exit the preview page, 
press the QUIT key.

6. To stop navigating, select “Stop Navigation” from the Map or 

Compass Page and press ENTER.

This fi eld changes 

to red at the 

second warning 

beep, when you are 

about to reach the 

turning point.

GPSmap 76C Owner's Guide copy.indd   43

10/5/2004, 1:55:30 PM