Garmin 200 Guida Di Riferimento

The Oregon operates on two AA batteries (not included). Use

alkaline, NiMH, or lithium batteries.
Use premium batteries for optimal performance and maximum

battery life. The best performance is provided by lithium batteries

and NiMH rechargeable batteries less than one year old with a

capacity greater than 2500 mAh.

To install the batteries:

1. Lift the latch and remove the

battery cover.

2. Insert the batteries,

observing polarity.

3. Replace the battery cover

and push the latch down.

NOTe: Remove the batteries when you do not plan to use the

Oregon for several months. Stored data is not lost when batteries

are removed.

To select the battery type:

1. On the Main Menu, touch

Setup

System

Battery Type

2. Select

Alkaline

Lithium

, or

NiMH.

To access the Map page, touch

Map

Your current location is indicated by

a location marker .

To zoom in or out:

Touch

or .

To pan across the map:

On the Map page, touch and drag

the screen.

To review detailed information about a point on the map:

1. Pan to the location you want to

review, if necessary, and then

touch it.

2. Touch the information button

at the top of the screen for

additional information.

To show or hide data fields:

1. On the Main Menu, touch

Setup

Map

Data Fields

Show

Data Fields

2. Touch

Never

When Navigating

, or

Always

To change the Map page data fields

1. On the Map page, touch one of the data fields.
2. Touch a data type.

Installing the Batteries

Latch

Battery cover

Using the Map Page

Zoom

buttons

Location

marker

Zoom range

Getting Started

To turn the Oregon on:

Press the

Power key.

To turn the Oregon off, press and hold the

Power key.

To adjust the backlight level:

1. While the Oregon is on, press and quickly

release the

Power key.

2. Touch

or to adjust the brightness

levels.

To lock or unlock the screen:

1. Press and quickly release the

Power key.

2. Touch

Lock Screen

(or

Unlock Screen)

To acquire GPS satellite signals:

1. Go outdoors to an open area, away from tall buildings and

trees.

2. Turn the Oregon on. Acquiring satellite signals can take a few

minutes.

The

bars on the Main Menu indicate satellite strength.

When the bars are green, the Oregon has acquired satellite

signals.

Main Menu

To mark your current location as a waypoint and edit the

waypoint:

1. On the Main Menu, touch

Mark Waypoint

2. Touch

Save and Edit

Touch the attribute you want to change.
Touch letters, numbers, or symbols to

make the changes.
Touch (except when changing a

symbol). Change other attributes, if

necessary.
Touch .

To edit a waypoint:

1. On the Main Menu, touch

Waypoint Manager

2. Touch the waypoint you want to edit.
To delete a waypoint:

1. On the Main Menu, touch

Waypoint Manager

2. Touch the waypoint you want to delete.
3. Touch

Delete Waypoint

To reposition a waypoint to your current location:

1. On the Main Menu, touch

Waypoint Manager

2. Touch the waypoint you want to reposition.
3. Touch

Reposition Here

•
•

•

Creating and Editing Waypoints

See the Important Safety and Product Information guide in

the product box for product warnings and other important

information.

Information

button