Garmin 500 Guida Utente

Appendix

CauTiOn: When replacing the fuse, 

do not lose any of the small pieces 

and make sure they are put back in the 

proper place. 

If your unit will not charge in your 

vehicle, you might need to replace the 

fuse located at the tip of the vehicle 

adapter. 

1.  Unscrew the black, round end piece, 

and remove it. 

2.  Remove the fuse (glass and silver 

cylinder), and replace it with a 3 A 

fast‑blow fuse. 

3.  Ensure that the silver tip is placed in 

the black end piece. Screw on the 

black end piece. 

Use the enclosed mounting disk to mount 

your unit to the dashboard and comply 

with certain state regulations. 

CauTiOn: The permanent mounting 

adhesive is extremely difficult to 

remove after it is installed. 

1.  Clean and dry the dashboard where 

you are placing the disk.

2.  Remove the backing from the 

adhesive on the bottom of the disk.

3.  Place the disk on the dashboard.
4.  Remove the clear plastic cover from 

the top of the disk.

5.  Place the suction cup mount on top of 

the disk. Flip the lever down (toward 

the disk).