Garmin 900t Guida Utente

Pagina di 72
 
nüvi 900 Series Owner’s Manual
Getting Started
4.  Place the suction cup on the 
windshield. 
5.  Flip the lever back, toward the 
windshield. 
6.  Fit the bottom of your nüvi into the 
cradle.
7.  Tilt the nüvi back until it snaps into 
place.
8.  Plug the other end of the vehicle 
power cable into a power outlet in 
your vehicle. Your unit should turn on 
automatically if it is plugged in and 
your vehicle is running.
To power connector
on nüvi cradle
To power outlet 
in vehicle
Antenna (suction 
cups not shown)
9.  Secure the antenna to the windshield 
using the suction cups.
Step 5: Configure the 
nüvi
To turn on your nüvi, slide the   
Power
 
key to the left. Follow the on-screen 
instructions. 
Step 6: Acquire Satellites
1.  Go outdoors to an open area, out of 
garages, and away from tall buildings. 
2.  Stop your vehicle, and turn on the 
nüvi. Acquiring satellite signals can 
take a few minutes. 
The 
 bars indicate GPS satellite 
strength. When at least one bar is green, 
the nüvi has acquired satellite signals. 
Now you can select a destination and 
navigate to it. For more information 
about GPS, go to 
.