Garmin 3760lmt Guida Utente

Appendix

3.  Install a 2 A fast-blow fuse.
4.  Verify that the silver tip is located 

in the end piece. 
Using a coin, replace the end 

piece.

The permanent mounting adhesive is 

extremely difficult to remove after it 

is installed. 
Use the enclosed mounting disk to 

mount your device to the dashboard 

and comply with certain state 

regulations. 
1.  Clean and dry the dashboard 

where you are placing the disk.

2.  Remove the backing from the 

adhesive on the bottom of the 

disk.

3.  Place the disk on the dashboard.
4.  Remove the clear plastic cover 

from the top of the disk.

5.  Place the suction cup mount on 

top of the disk. 

6.  Flip the lever down (toward the 

disk).

1.  Press up on the tab on the top of 

the cradle.

2.  Tilt the device forward.
Removing the Cradle from 

1.  Turn the cradle to the right or 

left.

2.  Apply pressure until the socket 

on the cradle releases the ball on 

the mount.