Garmin 680 Manuale Proprietario

G

ettinG

 S

tarted

Check your state and local traffic laws before mounting. Currently, state laws in California and Minnesota prohibit 

drivers from using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard or 

.

1.  Plug the vehicle power cable into the power connector on the back of 

the cradle.

2.  Clean and dry your windshield and the suction cup with a lint-free 

cloth. Place the suction cup on the windshield. 

3.  Flip the lever back, toward the windshield. 
4.  Flip up the GPS antenna. Fit the bottom of your nüvi into 

the cradle.

5.  Tilt the nüvi back until it snaps into place.
6.  Plug the other end of the vehicle power cable into a power 

outlet in your vehicle. The green LED on the vehicle power 

cable lights when connected to external power. Your unit 

should turn on automatically if it is plugged in and your 

vehicle is running.

To remove the nüvi from the cradle, press the small tab on the 

bottom of the cradle up, and tilt the top of the nüvi forward.
To remove the cradle from the mount, turn the cradle as far as you can to the right or 

left. Apply pressure in that direction until the cradle snaps off the mount. To remove 

the suction cup mount from the windshield, flip the lever toward you. Pull the tab on 

the suction cup toward you.

➊

➋

➌

➎

➍