Garmin 680 Manuale Proprietario

a

PPendix

Use the enclosed mounting disk to 

mount your unit to the dashboard and 

comply with certain state regulations. 

Caution: The permanent 

mounting adhesive is extremely 

difficult to remove after it is installed. 

1.  Clean and dry the dashboard where 

you are placing the disk.

2.  Remove the backing from the 

adhesive on the bottom of the disk.

3.  Place the disk on the dashboard.
4.  Remove the clear plastic cover from 

the top of the disk.

5.  Place the suction cup mount on top of 

the disk. Flip the lever down (toward 

the disk).

Caution: When replacing the 

fuse, do not lose any of the small 

pieces and make sure they are put 

back in the proper place. 

If your unit will not charge in your 

vehicle, you may need to replace the 

fuse located at the tip of the vehicle 

adapter.

1.  Unscrew the black, 

round end piece and 

remove it. 

2.  Remove the fuse 

(glass and silver 

cylinder) and replace 

with a 3A fast blow 

fuse. 

3.  Ensure that the silver 

tip is placed in the 

black end piece. 

Screw on the black 

end piece.