Garmin quest 2 Guida Di Riferimento

1.  Press the 

MENU key, highlight Route Options, and press OK. A Route 

Options menu appears.

2.  Highlight 

Stop Navigation or Resume Navigation, and press OK to 

stop or start the active route.

1.  Press the 

MENU key, highlight Route Options, and press OK. A Route 

Options menu appears.

2.  Highlight 

Vias, and press OK. An information page for your current 

route appears.

3.  Use the 

Rocker pad to highlight the Via Points box, and press OK. 

4.  Highlight 

<Select to add via point>, and press OK. A window appears 

with three options for finding your location.

5.  Select one of the three options. Once you select an option, the new via 

point appears on your route page.

6.  To add more via points, repeat steps 4 and 5 above.
7.  Highlight 

Navigate, and press OK when you are done. Your original 

route is automatically recalculated to include the newly-added via 

point(s).

1.  Align the ball on the end of the suction mount with the socket (hole) 

on the back of the cradle. Press firmly to snap the mount and cradle 

together. 

2.  Flip up the antenna on the back of the unit. Angle the Quest forward 

and fit the bottom of the Quest into the cradle. Tilt the unit back until it 

snaps in place.

3.  To ensure a tight grip, clean and dry your windshield before you mount 

the suction cup. Flip the lever on the suction cup toward you. 

4.  Place the suction cup on your windshield. Flip the lever back, toward 

the windshield. 

5.  Plug the power cable into an available receptacle. 

NOTICE TO STATE OF CALIFORNIA DRIVERS: California Vehicle Code Section 26708 (a) (1) provides 

that drivers in California should not use suction mounts on their windshield or side or rear windows. Other Garmin 

dashboard or friction mounting options should be used. For available accessories, refer to the Garmin Web site at 

www.garmin.com. Also, refer to the Owner’s Manual for instructions on using the included mounting disk with the 

suction cup mount. 

© Copyright 2006 Garmin Ltd. or its subsidiaries

January 2006 

190-00556-11 Rev. A 

Printed in Taiwan

1.  Press the 

FIND key. A Find page appears.

2.   Highlight an option that will help you find your destination, such as Auto 

Fuel, Food & Drink, or Lodging. Press the 

OK key. A list of places near 

your current location appears.

3.  Highlight the place you wish to visit, and press 

OK. An information 

page appears. (If you know you will want to visit this place again, select 

Save to add it to your My Locations list.) 

4.  Highlight 

Route To on the information page, and press OK. Your Quest 

calculates the route. Follow the calculated route to the destination. 

1.  Press the 

FIND key, highlight Addresses, and press OK. 

2.  A Wizard opens. Highlight the state if it appears on a button, or choose 

Select State and find the correct name. Press OK.

3.  Highlight 

Search All Cities, and press OK. You can also highlight 

Spell City, and press OK. Enter the city using the on-screen keyboard.

4.  Enter the address number and street using the on-screen keyboard. 

For intersections, you only need to enter street names. 

5.  A list of addresses appears. Highlight the desired address, and press 

OK. An Address page appears. 

6.  To create a route to this address, highlight 

Route To, and press OK. 

Use this Quick Reference Guide to learn how to perform common 

operations with your Quest 2. For a more thorough and detailed 

explanation of operations and features, consult the Owner’s Manual. 

Keep this guide in a handy place for future reference. 

Press and hold the Power   key on the front of the unit to turn it on. 

Select a suitable location for installing the unit that allows routing of 

the power cord and does not interfere with vehicle operation. Refer to 

the safety warnings in the Owner’s Manual. Select a location where the 

Quest’s flip-up antenna has an unobstructed view of the sky. For optimal 

Suction 

cup

Lever

Release 

tab

Cradle

Suction 

cup tab