Garmin 2620 Manuale Proprietario

5

•  ROUTE Key— Displays a menu of available route navigation features.

•  THUMB STICK — Selects menu options, changes settings, and enters data. Also it controls move-

ment of the map pointer on the Map page. Press in (or down) on the thumb stick to select or activate 
a highlighted item or to begin data entry. Move the thumb stick from side to side for moving around 
the Map page. Use this feature as an alternative to using your finger on the touchscreen. Practice using 
it to increase your accuracy.

•  ALPHANUMERIC KEYS — Used when you wish to enter numbers for values such as an address 

or waypoint name. These keys can be used in conjunction with the thumb stick. For letters, press 
the appropriate number key as many times as necessary to get to the correct letter. The number will 
appear after the last letter option has been shown. For example, if you wish to input the letter B, 
press the number 2 key twice. If you wish to input the number 2, press the number 2 key four times.  
When you have selected the correct letter or number, pause, and the unit will automatically advance 
the cursor to the next character. Note that the 1 key only accepts one press and SPACE/0 only accepts 
two key presses. 

In order for the remote to operate properly, be sure to point the IR (infrared) window on the remote 

towards the unobstructed IR window on the left front of the StreetPilot. 

Adjusting the Speaker Volume

1.  Press and hold the SPEAK/VOLUME key. A speaker volume adjustment page appears. 
2.  Adjust the speaker volume by moving the slider’s thumb up or down with either your finger (on the touch-

screen) or by pressing the thumb stick up or down once the scroll box appears. The loudest setting is ten; 
the softest setting is one. Each press activates the audio number. All the way down turns off the speaker. 
(Alternatively, volume can be cycled between three settings by repeatedly pressing the SPEAK/VOLUME 
key from this screen. The three settings are volume off, user setting, and maximum volume.) 

3.  When finished, touch the X on the touchscreen or press in once on the thumb stick.

The remote control requires 
two AAA alkaline batteries. To 
install the batteries, press up 
on the battery door clip, then 
pull the battery door away from 
the remote. Install the batteries, 
observing the correct polarity 
(see the inside compartment). 
Replace the cover. 

F

speaker volume
slider

slider thumb