Garmin 2620 Manuale Proprietario

46

Voice 

–

 This setting determines when the StreetPilot “speaks.” 

•  Guidance and Status: The unit speaks guidance messages during route navigation, as well as status 

messages. Guidance messages include such route navigation messages as “drive point eight miles west, 
then turn right.” For each turn on a route, the voice gives instructions three times: after you have com-
pleted a turn and are starting a new leg of the route; as you are approaching the next new turn; and 
just before you reach the next turn. Status messages include phrases such as “lost satellite reception.”

•  Route Guidance: The unit speaks guidance messages during route navigation, as described above. It 

does not give status messages.

•  SPEAK Key Only: The unit only speaks when the SPEAK key is pressed (it will not talk otherwise).

Touchscreen Tone 

–

 Allows you to turn the touchscreen click sounds On or Off.

Attention Tone 

–

 Determines whether the voice prompts are preceded by a chime. This is turned off by 

default.
Keypress Tone 

–

 Allows you to turn the keypress beeper sounds On or Off. A beep confirms that a key 

(such as MENU, FIND, SPEAK) on the unit or remote has been pressed.

Off-Route Recalculation 

–

 Controls how the StreetPilot recalculates the route when you depart from its 

original instructions.

• Prompted: You will be asked if you want the unit to recalculate the route.

• Automatic - Announced: The unit will automatically recalculate and announce to the user it is    

 recalculating.

• Automatic - Silent: The unit will automatically recalculate the route, but it will not announce to the  

 user it is recalculating.

• Off: The unit does not recalculate when you go off route.

Next Turn Pop-Up 

–

 Controls when the Next Turn page is displayed. Recall that the Next Turn page only 

appears during an active (or simulated) route as you are approaching a turn.  

Select Both on the Guidance tab, and the Next Turn 
page will automatically appear as you approach a turn. 
If you wish to hear the instructions again, press the 
unit’s SPEAK key.

The Attention Tone field determines whether voice 
prompts are preceded by a chime.