Garmin 2720 gps Manuale Proprietario

G

ETTING

 R

EADY

You can use the permanent or temporary adhesive disks, 

or the non-skid friction mount, to mount the StreetPilot 

in your vehicle. 

1. Clean and dry the area where you want to place 

the mount.

2. Remove one side of the backing from the 

adhesive and place the adhesive on the bottom 

of the mounting base. Remove the backing from 

the bottom of the adhesive. 

3. Place the mounting base so the locking lever 

is facing you and then position the base on the 

cleaned area. Apply pressure to adhere the base 

to the dashboard. 

1. Align the power plug on the vehicle adapter 

to the connector and slide the plug into the 

connector until fully seated.

2. Slide the locking lever on the mounting base to 

the left, in the unlocked position