Garmin 660 Guida Utente

Getting Started

Warning: Incorrectly wiring the power 

cable with bare wire leads can result in 

damage to the vehicle or the battery and 

can cause bodily injury. Garmin strongly 

recommends having an experienced 

installer with the proper knowledge of 

electrical systems install the unit.

Select a suitable and secure location to 

mount the zūmo on your motorcycle based 

on available power sources and safe cable 

routing.

The zūmo includes parts for two handlebar 

installation solutions. Custom mounts can 

require additional hardware (

www.ram 

-mount.com

).

1.  Place the U‑bolt around the handlebar, 

and thread the ends through the 

handlebar base.

2.  Tighten the nuts to secure the base. Do 

not overtighten. 

  noTe: The recommended torque is 50 

lbf-in. Do not exceed torque of 80 lbf-in.

noTe: Both 1/4” standard and M6 bolts 

are included. Match the size of the factory 

bolts on your clutch/brake clamp bracket.

1.  Remove the two factory bolts on your 

clutch/brake clamp bracket. 

2.  Thread the new bolts through the 

handlebar base, spacers, and clamp 

bracket. 

3.  Tighten the bolts to secure the base.