Garmin 660 Istruzione Sull'Installazione

note: Both 1/4 in. standard and M6 bolts are included. Match the size of the factory 

bolts on your clutch/brake clamp bracket.

1.  Remove the two factory bolts on your clutch/brake clamp bracket.
2.  Thread the new bolts through the handlebar base, spacers, and clamp bracket.
3.  Tighten the bolts to secure the base.

1.  Thread the M4 × 40 mm panhead screws through the washers, cradle, spacers,

and base plate.

2.  Tighten the nuts to secure the base plate.