Garmin 400 Scheda Rapida Di Riferimento

1.  Thread the M4 x 40 mm flathead bolts

and nuts to attach the base plate to the

zūmo mount.

2.  Tighten the nuts to secure the base plate.

1.  Align the ball of the

handlebar base and the

ball of the base plate with

the double-socket arm.

2.  Tighten the knob slightly.
3.  Adjust for better viewing

and operation.

4.  Tighten the knob to

secure the mount.

1.  Plug the power cable into

the zūmo mount. For a better

seal, tighten the screws on

the power connector.

2.  Flip the lever up.
3.  Flip the weather cap down

and under (magnetic).

4.  Place the zūmo into the

mount, and flip the lever

down.

5.  Tighten the security screw.

Use the security screw to better 

secure the zūmo to the mount. 

You can connect the screwdriver  

to your key chain for easy access. 

1.  Loosen the security screw.
2.  Flip up the lever on the mount.
3.  Lift out the zūmo.

tiP:  When your zūmo is not in the mount, use the 

weather cap to prevent damage to the connector.

For more information about the 

zūmo, refer to the zūmo 400/450 

Owner’s Manual on disk. 
See the Important Safety and 

Product Information guide for 

product warnings and legal 

information.