Garmin 500 Manuale Proprietario

a

PPendiX

The zūmo does not 

acquire satellite 

signals.

It can take a few minutes to acquire satellite signals. Go to an 

open area, out of garages, and away from tall buildings. Stop 

your vehicle, and position the zūmo where there is a clear 

view of the sky. The bars in the upper-left corner 

 indicate 

satellite strength. 

How do I clear all my 

user data?

Hold your finger on the lower-right corner of the zūmo’s screen 

while turning on the zūmo. Keep your finger pressed until the 

message appears. Touch 

 to clear all user data. 

The zūmo is locked 

up/frozen. 

To reset your zūmo, press and hold 

 and press 

.

The suction cup will not 

stay on my windshield. 

Clean the suction cup and windshield. Dry with a clean, dry 

cloth. Mount the suction cup as described on 

.

My battery gauge does 

not seem accurate.

Allow the unit to fully discharge, and then fully charge it (without 

interrupting the charge cycle).

The touch screen is not 

responding to my taps 

properly.

Calibrate the touch screen. Turn the unit off. Press and hold 

 

for about one minute until the Calibration page appears. Follow 

the on-screen instructions.

My Bluetooth device 

will not connect to the 

zūmo. 

Verify that the Bluetooth field is set to 

. Make sure your 

Bluetooth device is turned on and is less than 10 meters (about 

33 feet) away from your zūmo. Go to 

 

for a list of compatible phones and headsets.