Garmin 500 Manuale Utente

A

PPENDIX

Use the enclosed mounting disk to 

mount your zūmo on the dashboard and 

to comply with state regulations. 

 

NOTE: The permanent 

mounting adhesive is extremely 

difficult to remove after it is 

installed.

1.  Clean and dry the dashboard where 

you want to place the disk.

2.  Remove the backing from the 

permanent mounting adhesive on the 

bottom of the disk.

3.  Place the disk on the dashboard.
4.  Place the suction cup part of the 

automotive mount on top of the disk. 

5.  Flip the suction lever down (toward 

the disk).

6.  Follow steps 2–4 on 

To remove the zūmo from the mount, 

flip up the lever on the mount. Lift out 

the zūmo. 
You can separate the suction cup from 

the automotive mount. Turn the mount as 

far as you can to the right or left. Apply 

pressure in that direction until the mount 

snaps off the arm. 

 

NOTE: Reconnecting the 

suction cup to the automotive 

mount requires significant force. 

Press the ball end firmly into the 

socket.

To remove the suction cup from the 

windshield or mounting disk, flip the 

suction lever up. Pull the tab on the 

suction cup toward you.