Garmin 500 Guida All'Installazione Rapida

  Power button

  Zoom in, raise volume, or increase 

brightness. 

  Zoom out, lower volume, or 

decrease brightness.

  

Page button—scroll to the Map, 

Trip Information, Media Player, and 

Phone Menu pages. Press and hold to 

adjust brightness.

  

Speak button—press to adjust 

volume level. Press and hold to 

announce voice directions.

Part Number 190-00697-01 Rev. A          

October 2006    

  Printed in Taiwan

© 2006 Garmin Ltd. or its subsidiaries
Garmin

®

 is a registered trademark, and 

zūmo

™

 is a trademark of Garmin Ltd. or its 

subsidiaries and may not be used without 

the express permission of Garmin. 
The Bluetooth

®

 word mark and logos are 

owned by the Bluetooth SIG, Inc., and 

any use of such name by Garmin is under 

license.
For the latest free software updates 

(excluding map data) throughout the life 

of your Garmin products, visit the Garmin 

Web site at www.garmin.com.

This guide provides short instructions 

for various operations of your zūmo. 

Fold and keep this guide in your 

carrying case pocket. 
See the Important Safety and Product 

Information guide for product warnings 

and legal information.

WARNING: 

Do not leave your GPS unit 

exposed in an unattended vehicle on 

a hot day. To prevent damage, remove 

it from the vehicle; or store it out of 

direct sunlight, such as in the glove box. 

See the specifications in the owner’s 

manual.

 To prevent damage to 

the touch screen, do not place sharp 

objects in the carrying case pocket.
Specifications
Water resistance: IPX7 waterproof 

(submersible in one meter of water for 

up to 30 minutes)
Power: 12/24 VDC
Battery: Rechargeable, replaceable 

lithium-ion battery. 
Battery life: Fully charged, up to 4 hours
For more information, refer to the 

owner’s manual on disk.

To turn on your zūmo, press and hold 

the 

 

 button. Follow the 

on-screen instructions. 

Go outdoors to an open area, away 

from tall buildings and trees. Turn on 

the zūmo. Acquiring satellite signals 

may take a few minutes. 

 bars indicate GPS satellite 

strength. When the bars are green, 

your zūmo has acquired satellite 

signals, and you can start navigating.

To charge your zūmo, connect it to a 

power source using the 12/24 VDC 

cable or AC adapter. 

If the touch screen is not responding 

properly, calibrate the touch screen. 

Turn the unit off. Press and hold 

the 

 

 button for about one 

minute until the Calibration screen 

appears. Follow the on-screen 

instructions.

If your unit freezes up, press and hold 

the 

 

 button and press  .