Atlantic Technology FS-4000 Guida Utente
4
System FS-4000 Front Stage Loudspeaker
Placement
Speaker Placement and Home Theater
Remember that the primary goal of a good home theater is not to make you
believe that you are in a movie theater. It’s to make you believe you’re in the
movie. For a home theater system, place the FS-4000 speaker either above
or below your fl at screen display, centered horizontally. See Figure 2.
The speaker comes with your choice of two wall-mount brackets, a Straight
Bracket that points the speaker straight ahead, and an Angle Bracket that
either points the speaker down at the listeners (if it’s mounted above
the display) or up at the listeners (if it’s mounted below the display). See
Figure 6.
In addition, the FS-4000 can also be used as a set-top or shelf-mounted
speaker. Should you choose to use it that way, we’ve included Atlantic’s
exclusive Rocker Base. This base attaches easily to the bottom of the speaker
so that it may be tilted up or down towards the listening area as needed.
Alternately, the speaker can be placed directly on a shelf or on the televi-
sion without the rocker base, if desired. Four self-adhesive rubber feet are
included to prevent vibration and protect the mounting surface.
See Figure 9 to attach the Rocker Base
You may also simply mount the speaker to the wall using the built-in key-
hole brackets.
Because of the high quality components used, the FS-4000 speaker is very
heavy for its size and care must be used when hanging it. Be sure to use a
strong screw to drive into the wall, one whose head and shaft will fi t within
properly the keyhole opening and slot. Also be sure to drive the screw
directly into a stud or to use a mounting device (such a molly-bolt) that is
capable of safely holding the speaker’s weight. Never simply drive a nail or
screw into sheet rock or other wall materials, as this mounting method may
not be suffi cient to safely support the weight of the speaker.
believe that you are in a movie theater. It’s to make you believe you’re in the
movie. For a home theater system, place the FS-4000 speaker either above
or below your fl at screen display, centered horizontally. See Figure 2.
The speaker comes with your choice of two wall-mount brackets, a Straight
Bracket that points the speaker straight ahead, and an Angle Bracket that
either points the speaker down at the listeners (if it’s mounted above
the display) or up at the listeners (if it’s mounted below the display). See
Figure 6.
In addition, the FS-4000 can also be used as a set-top or shelf-mounted
speaker. Should you choose to use it that way, we’ve included Atlantic’s
exclusive Rocker Base. This base attaches easily to the bottom of the speaker
so that it may be tilted up or down towards the listening area as needed.
Alternately, the speaker can be placed directly on a shelf or on the televi-
sion without the rocker base, if desired. Four self-adhesive rubber feet are
included to prevent vibration and protect the mounting surface.
See Figure 9 to attach the Rocker Base
You may also simply mount the speaker to the wall using the built-in key-
hole brackets.
Because of the high quality components used, the FS-4000 speaker is very
heavy for its size and care must be used when hanging it. Be sure to use a
strong screw to drive into the wall, one whose head and shaft will fi t within
properly the keyhole opening and slot. Also be sure to drive the screw
directly into a stud or to use a mounting device (such a molly-bolt) that is
capable of safely holding the speaker’s weight. Never simply drive a nail or
screw into sheet rock or other wall materials, as this mounting method may
not be suffi cient to safely support the weight of the speaker.
NOTE: Always consult a knowledgeable installer regarding the proper
mounting hardware to use with your speakers.
mounting hardware to use with your speakers.
See Figures 3-9 for mounting instructions
�����
��
�����
������������������������
��������������������������������
����������������������������������
��������������������������
�����������������������������������
Placement
Figure 4
Stud Bracket
Figure 2
Speaker Placement
Figure 3
Stud Bracket Removal
For shipping purposes the
stud bracket is mounted to
the speaker. Remove the
stud bracket by removing
the screws before attempt-
ing any installation.
Reserve the screws for
attaching Straight/Angle
Brackets in Figure 6.