Hussmann m1gle-93 Guida Utente
15
Attach the Splashguard
Brackets – 13 to side of
Brackets – 13 to side of
legs using Screws – 14.
Attach Splashguard Joint
Supports – 15 using
Screws – 14. Refer to
Figure 16.
Attach Splashguard Joint
Supports – 15 using
Screws – 14. Refer to
Figure 16.
16
Install splashguards.
Adjust to minimize
any gap at joint.
Adjust to minimize
any gap at joint.
1. Check to be sure that all
splashguard brackets are
level with the floor.
level with the floor.
2. Position top of splashguard
over the top edge of the
bracket as shown below.
bracket as shown below.
3. Push the lower edge of the
splashguard toward the bot-
tom of the bracket until it
snaps into place.
tom of the bracket until it
snaps into place.
M1LGE-93 Joining
P/N 0503478_A
9
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
Figure 16 — Install Splashguard Brackets
Joint Support
Screw
Splashguard
Brackets
Brackets
Figure 17 — Install Splashguards
3.
Splashguard
2.
Bracket
Base of
Case
Case
1.
Splashguard