Kodak I4200 Guida Utente

A-61651 December 2009

5-5

4. Pull the separation pad holder forward and remove the separation roller.

NOTE: The separation roller cover is spring-loaded. Hold the separation 

roller cover back until you remove the separation roller, then 
gently lower the roller cover back in place.

5. Manually rotate and wipe the separation roller tires with a roller cleaning 

pad. For best results wipe parallel to the ribs in order to remove any 
residue between the ribs.

6. Inspect the tires. If the tires show signs of wear or damage, replace the 

separation roller. See “Replacement procedures” later in this chapter.

7. Reinstall the separation roller by aligning the slots on the separation roller 

with the holders.