Kodak I4200 Guida Utente

5-14

A-61651 December 2009 

1. Open the scanner cover.

2. Pull the separation roller cover forward and remove the separation roller.

NOTE: The separation roller cover is spring-loaded. Hold the separation 

roller cover back until you remove the separation roller, then 
gently lower the roller cover back in place.

If you want to replace the separation roller, do Steps 3 and 4. If you want to 
replace the separation roller tires, go to Step 5.

3. Insert the new separation roller. Be sure to line up the slots on the 

separation roller with the holders.

4. Release the separation roller cover back in place and close the scanner 

cover.