Kodak I4200 Guida Utente

4-10

A-61651 December 2009

Problem solving

Use the list below as a guide to check possible solutions to problems you may
encounter when using the printer.

Problem

Possible Solution

Print quality is poor or inconsistent

• Be sure the ink cartridge is not empty.
• Be sure the ink cartridge is properly installed.
• Be sure the ink cartridge is in the correct position for printing.
• Verify that the printer has been enabled in the scanning application and

that the expected print string has been specified.

• Verify that all printer connectors are securely fastened and that the

printer cable is securely attached.

• Run a print test to verify that all jets are functioning properly. See the

section entitled, “Running a print test” earlier in this chapter.

• Clean the print head (see “Printing problems when starting up due to

dry print head” below.)

Printing problems when starting up
due to dry print head

Remove the ink cartridge from the scanner and using a damp cloth or
swab, dab (do not wipe) the ink jets on the ink cartridge, replace the ink
cartridge and try again.

Not printing

• Be sure that printing is enabled in the scanning application.
• Check to be sure that the ink cartridge is secure in the desired print

position.

• Be sure the tape is removed from the print head.

U2 is displayed in the function
window when trying to print

• Print cartridge is not installed.