Kodak I4200 Guida Utente

5-6

A-61651 December 2009 

8. Clean the feed module tires by manually rotating and wiping the feed 

module tires with a roller cleaning pad. For best results wipe parallel to the 
ribs in order to remove any residue between the ribs. You do not need to 
remove the feed module to clean the tires.

9. Inspect the tires. If the tires show signs of wear or damage, replace the 

feed module tires. See “Replacement procedures” later in this chapter.

10. Wipe the upper and lower background strips with a Staticide wipe.

11. Wipe the upper and lower background strips again with an almost-dry 

Staticide wipe to remove any streaks.