ATSI dbd24-2085-01s Guida Utente

Selects the primary command language the printer uses.  The Advantage DLX 

uses Cognitive Printer Language (CPL) as the default command language.  
Select between CPL, EcPL, and ZcPL command languages. 

NOTE: THE ADVANTAGE DLX CURRENTLY DOES NOT SUPPORT TPCL COMMAND 
LANGUAGE. 

Select Direct Thermal or Thermal Transfer based on the model of Advantage 

DLX printer and the type of media being used. 

 THERMAL TRANSFER MODE REQUIRES THE USE OF A THERMAL 

TRANSFER PRINTER AND A PRINT RIBBON.  DIRECT THERMAL MODE REQUIRES THE 
USE OF DIRECT THERMAL MEDIA. 

 

 

The Print Width value adjusts the maximum 
printing width of the printer. 

•  0.15 to 2.4 inches for 2 inch model 

printers 

•  0.15 to 4.2 inches for 4 inch model 

printers 

Check and Apply Enable Auto Recalibration and the printer will 

automatically attempt to recalibrate in the event an index mark is not detected. 

Check and Apply Enable Automatic TOF and the printer will feed a label 

when the printer is turned ON or the printhead is latched. 

Indexing indicates to the printer the index type of the media being used.  The 

Indexing On check box must be checked when using Bar, Gap, or Notch style 
indexing.  Uncheck the Indexing On box when using continuous media.