Valcom v1090 Guida Utente

1

The Valcom V-1090 Flexhorn is a 45 Ohm talkback
horn designed to be used with Valcom “handsfree”
talkback control units.   This horn is weather proof and
can be used indoors or outside in environments ranging
from -20 to +55 degrees C.

Model V-1090-GY

Gray

Model V-1090-BG

Beige

Model V-1090-W White

White

-

Tip/A

Black

- Ring/B

•

 

6.8”H x 8.3”W x 3.3”D
(17.3cm H x 21.1cm W x 8.4cmD)

•

 

2 lbs. (.91 kg)

Using the template packaged with the speaker, draw the
speaker outline on the wall to be cut.  Make appropriate
wiring connections and test the speaker for operation. 
Using appropriate mounting screws (not furnished)
drill and mount the flange as shown.

Loosen or separate the universal bracket leaves by
loosening or removing the handle and hardware.  Using
the back leaf as a template, mark the wall through the
mounting holes, drill and mount to the wall using
appropriate screws (not furnished) or mount directly to
a junction box.  Mount the T-bracket to the back of the
horn as shown using the (2) ½" screws provided.

A "C" clamp is provided with the horns to allow
mounting to a beam.  Place the bolt through the hole in
the bottom of the base to secure the "C" clamp to the
beam.  It is suggested that the horn be mounted to the
underside of the "I" beam to provide the maximum of

positioning adjustments.  Mount “C” clamp with (2)
1/2” screws provided.

When trouble is reported, verify the unit is properly
connected and there are no broken connections leading
to this unit.  Ascertain volume control is turned up.

Assistance in troubleshooting is available from the
factory.  When calling, you should have a VOM and a
test set and be calling from the job site.  Call (540)
427-3900 and ask for Technical Support, or call (540)
427-6000 for Valcom 24-Hour Automated Support or
visit our website at http://www.valcom.com.

Valcom equipment is not field repairable. Valcom, Inc.
maintains service facilities in Roanoke, VA.  Should
repairs be necessary, attach a tag to the unit clearly
stating company name, address, phone number, contact
person, and the nature of the problem.  Send the unit to: