Viewsonic PJ513D Manuale Utente
ViewSonic 35 PJ513D/PJ513DB
SYSTEM SETUP: Advanced menu
FUNCTION
(default setting /
value)
value)
DESCRIPTION
Quick Cooling
(On)
Enables or disables the Quick Cooling function. Selecting On
enables the function and projector cooling time will be shortened
from a normal 90-second duration to approximately 30 seconds.
enables the function and projector cooling time will be shortened
from a normal 90-second duration to approximately 30 seconds.
High Altitude
Mode
(Off)
Mode
(Off)
A mode for operation in high altitude areas. See
"Operating in a high
altitude environment" on page 26
for details.
DCR
(Off)
(Off)
Enables or disables the DCR (Dynamic Contrast Ratio) function.
Selecting On enables the function and the projector will
automatically switch the lamp mode between normal and economic
mode according to the input image detected.
Selecting On enables the function and the projector will
automatically switch the lamp mode between normal and economic
mode according to the input image detected.
This function is only available when a PC source is in use.
After enabling DCR, frequent lamp mode switching may shorten lamp
life and noise level will vary during operation.
Audio
Settings
Settings
Mute (Off)
Volume (5)
See
Volume (5)
See
"Adjusting the sound" on page 27
for details.
Active VGA
out (On)
out (On)
Enables or disables the Active VGA out function. When selecting
On, the projector can output a VGA signal when it is in standby
mode.
On, the projector can output a VGA signal when it is in standby
mode.
Enabling the Active VGA out function increases the standby
power consumption to less than 10W.
Menu Settings
Menu Display Time (15 sec)
Sets the length of time the OSD will remain active after your last
button press. The range is from 5 to 30 seconds in 5-second
increments.
button press. The range is from 5 to 30 seconds in 5-second
increments.
Menu Position (Center)
Sets the On-Screen Display (OSD) menu position.