Viking Range ddff136ss Istruzione Sull'Installazione
27
26
1. Plug into a grounded 3 prong outlet.
NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice
produced. Allow 3 days to completely fill the ice container.
produced. Allow 3 days to completely fill the ice container.
Complete the Installation
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
result in death, fire, or electrical shock.
1
2
1
2
Locate water filter compartment. The compartment is
located in the upper right corner of the refrigerator. Push
tab on compartment to release latch and pull downward.
tab on compartment to release latch and pull downward.
Unscrew and remove the water filter blue
bypass cap.
1
2
3
Bottom-Mount
4
Insert filter cartridge into filter housing. Rotate
clockwise gently until filter stops.
Close water filter door.
NOTE: Allow 1-2 minute delay in water dispersal to
allow internal water tank to fill.
Flush air from the system by running water through the
dispenser continuously for 3 minutes.
Water Filter Installation
3
1
2
Remove toe grille. Grasp firmly and pull outward to
unclip.
To raise left side door, turn leveler foot
screw clockwise.
Door Alignment
(French Door Bottom-Mount)
To raise left side door, turn leveler foot
screw clockwise.
4
Replace toe grill. Align the toe grille mounting clips
with the lower cabinet slots. Push the toe grille firmly
until it snaps into place.