Vitek vt-ptz10 Guida Utente
VT-PTZ Series
76
8) Let go of the SHIFT button to finish
programming the pan position.
3.5.4.3 Save and Exit
Save the changes and exit to the SETUP
menu.
menu.
3.5.5 TILT OVER ANGLE
Tilt Over Angle sets the limit to the horizontal view angle so that the trim ring or the
housing or the ceiling does not obstruct the view of the camera.
3.5.5.1 W/O Bubble
This factory default setting limits the tilt range of the
Xpress Dome to 0 degrees and 180 degrees.
Xpress Dome to 0 degrees and 180 degrees.