Sony DSC-P100 Guida Utente
83
Enj
o
yi
ng
im
im
ages on you
r co
m
m
p
ut
er
Connecting the camera to
your computer
your computer
a
Insert the “Memory Stick” with
the images you want to copy
into the camera, then close the
battery/“Memory Stick” cover.
the images you want to copy
into the camera, then close the
battery/“Memory Stick” cover.
b
Open the DC IN jack cover, and
connect the AC Adaptor
(supplied), then plug the
adaptor into a wall outlet (wall
socket).
connect the AC Adaptor
(supplied), then plug the
adaptor into a wall outlet (wall
socket).
•
When you copy images to your computer using
the battery pack, copying may be failed or
cause data corruption by battery shutoff. We
recommend that you use the AC Adaptor.
the battery pack, copying may be failed or
cause data corruption by battery shutoff. We
recommend that you use the AC Adaptor.
c
Set the mode dial to
. Turn
on your computer and the
camera.
camera.
•
You can also carry out this operation when the
mode dial is set to SET UP.
mode dial is set to SET UP.
d
Connect the USB multi cable
(supplied) to the multi
connector of the camera.
(supplied) to the multi
connector of the camera.
•
Place the camera with the LCD screen facing
upwards.
upwards.
e
Connect the USB multi cable
to your computer.
to your computer.
•
When you use a desktop computer, we
recommend that you connect the USB multi
cable to the USB connector on the rear panel.
recommend that you connect the USB multi
cable to the USB connector on the rear panel.
•
When using Windows XP, the AutoPlay wizard
automatically appears on the desktop. Proceed
to page 85.
automatically appears on the desktop. Proceed
to page 85.
“USB Mode Normal” appears on the
LCD screen of the camera. When a
USB connection is established for the
first time, your computer automatically
runs the used program to recognize the
camera. Wait for a while.
LCD screen of the camera. When a
USB connection is established for the
first time, your computer automatically
runs the used program to recognize the
camera. Wait for a while.
*
During communication, the access
indicators turn red. Do not operate the
computer until the indicators turn white.
indicators turn red. Do not operate the
computer until the indicators turn white.
•
If “USB Mode Normal” does not appear in step
5, press MENU, select [USB Connect], and
set it to [Normal].
5, press MENU, select [USB Connect], and
set it to [Normal].
AC Adaptor
2
To a wall
outlet (wall
socket)
1
USB Mode
MENU
Switch on
Normal
Access
indicators*
indicators*