VIZIO vw42lf Guida Utente
VIZIO VW42L FHDTV10A User Manual
Version 2/29/2008
12
www.VIZIO.com
1.5
VIZIO Remote Control
GUIDE – This button displays program information. Press this button once when in TV mode and the
information of the program being viewed is shown. Press it a second time and the Electronic
Programming Guide will appear in the screen. In any other mode when this button is pressed, the screen
will display the selected input plus the definition of the signal; for example, HDMI 720p, HDMI 1080i, etc.
POWER (
) – Press this button to turn the TV on from the Standby mode. Press it again to return to
the Standby mode.
TV – Press this button to select TV.
AV – Press this button to select AV1 and AV2 (either Composite or S-Video) input.
COMP – Press this button to select the Component (YPbPr) input. By pressing this button repeatedly you
will be switching from Component 1 to Component 2 and vice versa.
HDMI – Press this button to select the HDMI input. By pressing it
repeatedly you will go through the three (HDMI 1, HDMI 2 and HDMI 3)
inputs in sequence.
TV – Press this button to select TV.
AV – Press this button to select AV1 and AV2 (either Composite or S-Video) input.
COMP – Press this button to select the Component (YPbPr) input. By pressing this button repeatedly you
will be switching from Component 1 to Component 2 and vice versa.
HDMI – Press this button to select the HDMI input. By pressing it
repeatedly you will go through the three (HDMI 1, HDMI 2 and HDMI 3)
inputs in sequence.
MENU – Use this button for the On-Screen Display (OSD) menu. When
it is used within a menu selection, pressing this key will help you to
make the selection of the feature to be adjusted after it has been
highlighted.
it is used within a menu selection, pressing this key will help you to
make the selection of the feature to be adjusted after it has been
highlighted.
-These labeled buttons are used to navigate the OSD
menu. When navigating the OSD menu, the arrows control the direction
up and down or left and right. They will also be used as value settings
when the slide bar is shown on the screen and option settings to turn a
feature off or on.
MUTE – This button turns the sound on and off.
LAST – This button recalls the previously viewed channel. If the On-
Screen Display (OSD) menu is being used, this button will allow you to
get back to previous menu screen or out to your program when you
press it repeatedly.
menu. When navigating the OSD menu, the arrows control the direction
up and down or left and right. They will also be used as value settings
when the slide bar is shown on the screen and option settings to turn a
feature off or on.
MUTE – This button turns the sound on and off.
LAST – This button recalls the previously viewed channel. If the On-
Screen Display (OSD) menu is being used, this button will allow you to
get back to previous menu screen or out to your program when you
press it repeatedly.
VOL ▲/▼ – This button turn the volume up or down.
CH ▲/▼ – This button change the channels
up or down.
up or down.
hen
NUMBER BUTTON PAD – Use these buttons
to select a channel or enter a password.
INPUT – This button allows the user to cycle
through the inputs. Repeatedly pressing of
this button will step you through the input
sources in the following sequence: TV, AV1,
AV2/S-VIDEO, Component1, Component2,
RGB, HDMI1, HDMI2, and HDMI3. Once you
have stepped through the entire sequence,
you will return to the beginning.
- (DASH) – When selecting a digital channel
directly use this button for the separation of
main and sub-channels. For example,
channel 28-2 would be selected by the button
sequence 2 8 ENTER 2.
to select a channel or enter a password.
INPUT – This button allows the user to cycle
through the inputs. Repeatedly pressing of
this button will step you through the input
sources in the following sequence: TV, AV1,
AV2/S-VIDEO, Component1, Component2,
RGB, HDMI1, HDMI2, and HDMI3. Once you
have stepped through the entire sequence,
you will return to the beginning.
- (DASH) – When selecting a digital channel
directly use this button for the separation of
main and sub-channels. For example,
channel 28-2 would be selected by the button
sequence 2 8 ENTER 2.