VIZIO vw42lf Guida Utente
VIZIO VW42L FHDTV10A User Manual
Version 2/29/2008
26
www.VIZIO.com
2.8
Connecting a PC Computer
1.
Turn off the power to the HDTV and
PC Computer.
PC Computer.
2.
Connect a 15-pin D-Sub RGB (VGA)
cable to the RGB output of your pc
computer and the other end to the
cable to the RGB output of your pc
computer and the other end to the
RGB PC input (blue area) at the rear
of the HDTV.
of the HDTV.
3.
Connect the Audio Out on your pc
computer to the RGB PC Audio input
(blue area) at the rear of the HDTV.
computer to the RGB PC Audio input
(blue area) at the rear of the HDTV.
This connection must have a 1/8” stereo mini plug at one end of the cable to fit into the
computer’s input jack.
computer’s input jack.
4.
Turn on the HDTV and PC Computer.
5.
Select RGB using the INPUT button on the remote or side of the HDTV.
Note:
a)
For the best picture quality when connecting a pc computer through RGB PC, please refer
to the pc or graphic card’s user guide to find out if it is capable of an output of 1920x1080
at 60Hz when using the parameters and values given to you on Section 2.8.2 of this
User’s Manual by way of VESA Reduce Blanking timing.
to the pc or graphic card’s user guide to find out if it is capable of an output of 1920x1080
at 60Hz when using the parameters and values given to you on Section 2.8.2 of this
User’s Manual by way of VESA Reduce Blanking timing.
b)
A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at
an electronics store.
an electronics store.