JVC gr-d650 Manuale Istruttivo

MasterPage: Start_Right

Attach the core filters to the cables. The core 
filter reduces interference.

Release the stoppers on both ends of the 

core filter.

Run the cable through the core filter, leaving 

approx. 3 cm (1-3/16") of cable between the 
cable plug and the core filter.
Wind the cable once around the outside of the 
core filter as shown in the illustration.

Close the core filter until it clicks shut.

● Take care not to damage the cable.

● When connecting a cable, attach the end with the 

core filter to the camcorder.

This camcorder’s 2-way power supply system 
lets you choose the most appropriate source of 
power. Do not use provided power supply units 
with other equipment.

Set the Power Switch to “OFF”.

With the arrow on the battery pack pointing 

downward, push the battery pack slightly against 
the battery pack mount 1.

Slide down the battery pack until it locks in 

place 2.

Connect the AC Adapter to the camcorder.

Plug the AC Adapter into an AC outlet. The 

POWER/CHARGE lamp on the camcorder 
blinks to indicate charging has started.

When the POWER/CHARGE lamp goes out, 

charging is finished. Unplug the AC Adapter 
from the AC outlet. Disconnect the AC Adapter 
from the camcorder.

1

2

GR-D650US.book  Page 13  Monday, February 27, 2006  9:38 AM