JVC gr-d650 Manuale Istruttivo

MasterPage: Start_Right

Adjust the velcro strip. 

● Before making the 

adjustment, remove any 
security tags that may 
be attached to the 
velcro.

Pass your right hand 

through the loop and 
grasp the grip.

Adjust your thumb and 

fingers through the grip to 
easily operate the Recording Start/Stop Button, 
Power Switch and Power Zoom Lever. Be sure 
to fasten the velcro strip to your preference.

Set the Power Switch to “REC” while pressing 

down the Lock Button located on the switch.

Make sure the LCD monitor is closed and 

locked. Pull out the viewfinder fully and adjust it 
manually for best viewability.

Turn the Diopter Adjustment Control until the 

indications in the viewfinder are clearly focused.

When retracting the viewfinder, take care not to 
pinch your fingers. 

Set the Power Switch 

to “REC” or “PLAY” while 
pressing down the Lock 
Button located on the 
switch. 

Open the LCD monitor 

fully. (

● To adjust the brightness of 

the viewfinder, pull out the 
viewfinder fully and set 
“PRIORITY” to “FINDER” 
(

Press MENU. The 

Menu Screen appears. If 
you are in Playback mode, 
please proceed to Step 

5.

Press 3, 4, 2 or 

1

 to select “DISPLAY”, and 

press SET. The DISPLAY Menu appears.

Press 3, 4, 2 or 

1

 to select “BRIGHT”, and 

press SET. The Menu Screen closes and the 
brightness control menu appears.

Press 3 or 4 until the appropriate brightness 

is reached and press SET or 2.

Press MENU. The menu screen closes.

To attach the camcorder 
to a tripod, align the 
direction stud and screw 
to the mounting socket 
and stud hole on the 
camcorder. Then tighten 
the screw clockwise.

● Some tripods are not 

equipped with studs.

BRIGHT

– 5

BRIGHT

– 5

1

1

1

1

2

2

2

2

4

4

4

4

3

3

3

3

GR-D650US.book  Page 17  Monday, February 27, 2006  9:38 AM