Lexmark Platinum Pro905 Manuale Utente
C
HECK
YOUR
NETWORK
CONNECTION
Make sure the printer is connected to an Ethernet or wireless network. Your network must be connected to the
Internet for the printer to communicate with the SMTP server.
Internet for the printer to communicate with the SMTP server.
C
HECK
YOUR
PROXY
CONFIGURATION
Your proxy server configuration should allow SMTP server connections. For help with your proxy server or SMTP
settings, contact your system support person.
settings, contact your system support person.
M
AKE
SURE
TO
ENTER
A
VALID
RECIPIENT
E
-
MAIL
ADDRESS
M
AKE
SURE
THE
RECIPIENT
MAILBOX
IS
NOT
FULL
This causes e-mail to bounce back to your inbox.
Cannot attach files
S
ELECT
A
SUPPORTED
FILE
TYPE
(JPEG
OR
PDF)
M
AKE
SURE
THE
FILE
SIZE
IS
NOT
TOO
LARGE
Fax troubleshooting
•
•
•
•
•
For detailed descriptions of common terms and tasks, see the following:
•
•
Fax troubleshooting checklist
If you encounter problems sending and receiving faxes, then check the connection first:
1
Check for a dial tone on the telephone line by plugging an analog telephone into the wall jack, DSL filter, VoIP
device, or cable modem where you connected the printer. Make sure you plug the telephone into the same port.
device, or cable modem where you connected the printer. Make sure you plug the telephone into the same port.
If you do not hear a dial tone, then contact your line provider.
2
While the printer is connected to the telephone line, check for a dial tone by plugging an analog telephone into
the
the
port of the printer.
If you do not hear a dial tone, then use the checklist below. Listen for a dial tone after checking each item.
If you hear a dial tone but still have problems sending and receiving faxes, then see the other topics in this section.
Troubleshooting
148