Fujifilm z3 Manuale Proprietario

118

Connecting to a PC

• Always use the cradle and the FUJIFILM AC Power 

Adapter AC-5VC. If the camera suddenly loses power 
during data exchange, the xD-Picture Card or internal 
memory could be damaged.

• Do not disconnect the USB cable (mini-B) when the 

camera is communicating with a PC. If disconnecting 
the USB cable (mini-B) during communication, the files 
on the xD-Picture Card or internal memory may cause 
damage.

• In Mac OS X, you must set the automatic setup when 

the first time you connect the camera to your PC.

• Make sure that USB cable (mini-B) is connected 

correctly and pushed in.

• Perform pre-arranged steps to disconnect and turn off 

the camera (

➝p.119).

• When the camera and PC are exchanging data, the 

indicator lamp blinks alternately green and orange.

• Auto power off is disabled during PC connection.
• Before replacing the xD-Picture Card, always 

disconnect the camera from the PC. See p.119 for 
information on the disconnection procedure.

• The camera and PC may be exchanging data even 

when “Copying” disappears on your PC screen. Before 
disconnecting the USB cable (mini-B), always check 
that the indicator lamp is off.

• Always use FinePixViewer to transfer images with voice 

memos to a PC.

F Set a PC.

The Windows CD-ROM may also be required during 
installation. In this event, change CD-ROMs as directed 
by the on-screen instructions.

• FinePixViewer automatically starts up and the Save 

Image Wizard window (Save Image dialog box) 
appears. Follow the instructions provided on screen to 
save the images. To proceed without saving the 
images, click the [Cancel] button.

*

Screen for Windows 2000 Professional