DataCard 285 Guida Utente
4-8
Maintaining the printer
User’s Guide for the Magna™ Class Printer
Clean the supply tracker
1
Power off the printer.
2
Prepare a printer cleaning card.
–
If you just used a printer cleaning card in the printer, you can
use that card to complete this procedure.
use that card to complete this procedure.
–
If you have not run a printer cleaning card, remove the
protective paper from one side of the card.
protective paper from one side of the card.
Figure 4-7: Remove the protective paper from the cleaning card
3
Lift the supply tracker until it stops and holds it in place.
Remove the overlay cartridge for easier access to the supply
tracker. See
for steps to follow.
4
Roll the sticky surface of the cleaning card against the overlay
supply tracker. Rotate the supply tracker to clean all sides.
supply tracker. Rotate the supply tracker to clean all sides.
Do not touch the surface of the supply tracker with your fingers.
Oils from the skin can cause the supply tracker to slip or can
affect card quality.
Oils from the skin can cause the supply tracker to slip or can
affect card quality.
Figure 4-8: Clean the supply tracker
E
!
MagnaUserGuide.book Page 8 Friday, May 5, 2000 1:09 PM