DataCard 285 Guida Utente
Maintaining the printer
4-13
User’s Guide for the Magna™ Class Printer
Figure 4-12: Replace the printhead cartridge
5
Clean the printhead. Move the cleaning pen up and down along
the length of the printhead edge. Be sure to completely clean the
rounded edge of the printhead.
the length of the printhead edge. Be sure to completely clean the
rounded edge of the printhead.
6
Close the swing arm, pressing it down until the push latch clicks
into place.
into place.
7
Gently pull the excess printhead cartridge cable out of the top of
the swing arm.
the swing arm.
8
Remove the ESD strap.
9
To close the cover, lift the top slightly. Move the support up so it is
parallel with the hinges and lower the cover.
parallel with the hinges and lower the cover.
10 Power on the printer.
11 Print a card to verify the quality of printing. You can print a
Windows test page or a card using your card creation application.
If card quality is still inadequate, see
If card quality is still inadequate, see
♦
2
MagnaUserGuide.book Page 13 Friday, May 5, 2000 1:09 PM