Celestion classic lead 80 Guida Specifiche

GUITAR

LOUDSPEAKERS

110

90

70

20

100

1k

20k

FREQUENCY (Hz)

SPL (dB)

8Ω FREQUENCY RESPONSE

Celestion International Ltd, Claydon Business Park, Great Blakenham, Ipswich, IP6 0NL, England 
Tel: +44 (0)1473 835300 Fax: +44 (0)1473 835301 info@celestion.com www.celestion.com

Revolutionary in the late ’70s, a fibreglass
voice coil former - capable of withstanding
very high temperatures - was used to give the
Classic Lead a muscular 80W power handling.
This also increased barrel stiffness, affecting
the way the cone vibrated and influencing
cone break up. Then, through experimentation
with edge treatments and continued critical
listening, some modes were encouraged while
others were suppressed, contributing to the
speaker’s unique sound.

Today, the Classic Lead is much-loved by lead
guitarists for its speed, punch and articulation,
with every note clearly defined on even big,
distorted sounds.

The Classic Lead also sounds great clean, with
that same articulation combining with high
headroom to deliver a fluid, dynamic
performance.

Nominal diameter  . . . . . . . . . . . . . . . . 12", 305mm
Power rating  . . . . . . . . . . . . . . . . . . . . . . . . . . 80W
Nominal impedance  . . . . . . . . . . . . . . . 8Ω & 16Ω
Sensitivity  . . . . . . . . . . . . . . . . . . . . . . . . . . . 99dB
Chassis type  . . . . . . . . . . . . . . . . . . . Pressed steel
Voice coil diameter  . . . . . . . . . . . . . 1.75", 44.5mm
Voice coil material  . . . . . . . . . . . . . . .Round copper
Magnet type  . . . . . . . . . . . . . . . . . . . . . . . .Ceramic
Magnet weight  . . . . . . . . . . . . . . . . . .50oz, 1.42kg
Frequency range  . . . . . . . . . . . . . . . . . .80-5000Hz
Resonance frequency, Fs  . . . . . . . . . . . . . . . . .85Hz
DC resistance, Re  . . . . . . . . . . . . . . 6.9Ω & 11.8Ω

Diameter  . . . . . . . . . . . . . . . . . . . . . 12.2", 309mm 
Overall depth  . . . . . . . . . . . . . . . . . . . 5.3", 135mm 
Magnet structure diameter  . . . . . . . . . . 6.1", 156mm
Cut-out diameter  . . . . . . . . . . . . . . . 11.1", 283mm
Mounting slot 
dimensions  . . . . . . . . . . . . . . . . . . 0.31", 7.9mm Ø
Number of mounting slots  . . . . . . . . . . . . . . . . . . 4
Mounting slot PCD . . . . . . . . . . . . . . 11.7", 297mm
Unit weight  . . . . . . . . . . . . . . . . . . . . 10.4lb, 4.7kg