Bizfon 2000 Guida Utente
Bizfon Manual II: Administrator's Guide
Bizfon’s Graphical Interface
Bizfon2000 and Bizfon4000 (SW Version 4.1.x)
5
Bizfon’s Graphical Interface
Administrator’s Main Page
When the administrator logs in, the Bizfon Management page is displayed with a table of active calls (including information about call peers, call
duration and start time) at the startup. The button Terminate next to each active call is used to terminate the corresponding call. Here the
administrator may access the following settings and perform the actions:
duration and start time) at the startup. The button Terminate next to each active call is used to terminate the corresponding call. Here the
administrator may access the following settings and perform the actions:
Fig. II-1: Bizfon4000 Management
By clicking on System, Users, Telephony, Internet Uplink or Network the administrator may access the following settings in each respective
category and perform actions specific to each category.
category and perform actions specific to each category.
The Install Checklist option in the Main Menu opens a page that lists the most useful actions and the corresponding hyperlinks for the Bizfon’s
initial setup and configuration procedure. From this page you can be linked to the appropriate pages where the corresponding configuration can be
done. Here, you can also save your progress of Bizfon’s setup by selecting the corresponding action’s checkbox and pressing Save.
initial setup and configuration procedure. From this page you can be linked to the appropriate pages where the corresponding configuration can be
done. Here, you can also save your progress of Bizfon’s setup by selecting the corresponding action’s checkbox and pressing Save.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
The functional button Renew Wan IP Address appears on the administrator’s main Bizfon Management page if the Bizfon device acts as a DHCP
client. The Renew WAN IP Address button is used to obtain a new WAN IP address in case, e.g., the Bizfon moves to another network.
client. The Renew WAN IP Address button is used to obtain a new WAN IP address in case, e.g., the Bizfon moves to another network.
The functional button Establish Your Internet Connection Now respectively Terminate Your Internet Connection Now occurs on the Bizfon
Management page if PPPoE is used as WAN interface protocol.
Management page if PPPoE is used as WAN interface protocol.
The link Please Check Your Pending Events will be displayed on the administrator Main Menu page if new system events exist. The link leads to
the Events page that can be also accessed from the System menu.
the Events page that can be also accessed from the System menu.
The list of Users currently logged into the system is seen in the lower right corner of the Administrator's Main Menu. Information about IP address
user accessed Bizfon GUI from, the username user is logged in and the time until the next automatically logout is provided herein. The current
version of the Bizfon's firmware and of its boot loader is also available here. The idle session timeout is set to 20 minutes. If no action is performed
during that time, user will be automatically moved to the Login page and will be requested to login again.
user accessed Bizfon GUI from, the username user is logged in and the time until the next automatically logout is provided herein. The current
version of the Bizfon's firmware and of its boot loader is also available here. The idle session timeout is set to 20 minutes. If no action is performed
during that time, user will be automatically moved to the Login page and will be requested to login again.
The link Refresh in occurs in the upper right corner beside the field displaying the number of seconds until the next refresh and is used to perform a
manual reload of the page. If a page with a Refresh counter is left opened, the session time-out counter will be updated periodically and the logout
timeout will never expire.
manual reload of the page. If a page with a Refresh counter is left opened, the session time-out counter will be updated periodically and the logout
timeout will never expire.