Bizfon 2000 Guida Utente
Bizfon Manual II: Administrator's Guide
Administrator’s Menus
Bizfon2000 and Bizfon4000 (SW Version 4.1.x)
66
The Add Entry page consists of the following components:
The Enable Registration checkbox selection is used to enable
the registration to the corresponding master device.
the registration to the corresponding master device.
The Trunk Name text field requires the SIP trunk name for the
corresponding connection. System suggests you to start the SIP
trunk name with the “SIP_Trunk_” words, according to the
automatic prefix used for the SIP trunks on the Bizfon, however
this is not mandatory.
corresponding connection. System suggests you to start the SIP
trunk name with the “SIP_Trunk_” words, according to the
automatic prefix used for the SIP trunks on the Bizfon, however
this is not mandatory.
The User Name text field requires the authentication user
name. The field in front of this text field displays the default non-
editable prefix for SIP trunks: “SIPTrunk_”.
name. The field in front of this text field displays the default non-
editable prefix for SIP trunks: “SIPTrunk_”.
The Password text field requires the authentication password.
Please Note:
The User Name and Password should match
both on master and slave Bizfons for the successful SIP trunk
establishment.
establishment.
Fig. II-124: SIP Trunk Settings – Trunks to Master Devices – Add Entry page
The Master device IP text field requires the IP address of the master device.
The Master device port text field requires the SIP port number of the master device.
The Registration State field displays information whether the slave device is registered on the master or not.
The Registration Date/Time field displays the time and the date of last registration on the master’s device.
Call Routing
The Call Routing service simplifies the calling procedure for Bizfon users, i.e., different types of calls (internal, SIP, PSTN or IP-PSTN) can be
placed in the same way. SIP registration is not needed for extensions to make routing calls.
placed in the same way. SIP registration is not needed for extensions to make routing calls.
The Call Routing page offers the following components:
•
When the Route all incoming SIP calls to Call Routing
checkbox is disabled, for all incoming SIP calls Bizfon will
first search the incoming SIP address in the
checkbox is disabled, for all incoming SIP calls Bizfon will
first search the incoming SIP address in the
table. If found, the incoming SIP call will ring
on the corresponding extension. If not found, Bizfon will
look for a matching routing rule in
look for a matching routing rule in
table.
When the Route all incoming SIP calls to Call Routing
checkbox is enabled, for all incoming SIP calls Bizfon will
directly look for a matching routing rule in
checkbox is enabled, for all incoming SIP calls Bizfon will
directly look for a matching routing rule in
table and will ignore the possible matches in the
table.
•
The Call Routing Table link leads to the Call Routing
table where routing patterns may be manually defined.
table where routing patterns may be manually defined.
•
The Local AAA Table link leads to the page where local
AAA (Authentication, Authorization, and Accounting)
database can be managed.
AAA (Authentication, Authorization, and Accounting)
database can be managed.
Fig. II-125: Call Routing page