Bizfon 2000 Guida All'Installazione

Bizfon Manual I: Installation Guide 

Step 2.2: System Configuration Wizard 

 

If the DHCP server is enabled, the Bizfon will automatically assign dynamic IP addresses to 
the stations connected to its LAN port.  
If you didn’t change the default LAN IP address of the Bizfon, you also may leave the de-
fault values for the IP Address Range. Make sure your connected LAN devices belong to 
the same network as the LAN port of your Bizfon. 

 Make sure there is only one DHCP server on the LAN, otherwise, unpredict-

able network behavior can occur. 

 

Fig. I-12:  System Configuration Wizard - DHCP Settings for the LAN Interface page 

Click on Next to display the Regional Settings page

. 

 

If your Bizfon is located outside of the United States, it is important to properly configure 
your line connections to the PSTN in your location. 

 

Fig. I-13:  System Configuration Wizard - Regional Settings page 

Proper configuration of Regional Settings is important for the functionality of the voice sub-
system. The Regional Settings determine the proper telephony parameters on the LINE 
and PHONE ports of the Bizfon for the specified country. Select the country where the 

 

Bizfon2000 and Bizfon4000; (SW Version 4.1.x)

 

19