Hitachi DZ-MV580A Manuale Utente
English
8
Be careful of moisture condensation:
•
When you move the DVD video camera/recorder between places where the difference in
temperatures is great - such as entering a lodge from a ski slope or going out of a cooled room or vehicle
- condensation (vapor in air warmed or cooled to water droplets) could occur on the lens and/or inside
the DVD video camera/recorder. If condensation occurs, do not open the cover of disc or card insertion
block if possible. If condensation occurs on the lens, wipe it off with a soft, dry cloth. Even if the external
surface of DVD video camera/recorder has dried, condensation may remain inside: Turn the DVD
video camera/recorder off and leave it in a dry place for at least 1-2 hours before using it again.
temperatures is great - such as entering a lodge from a ski slope or going out of a cooled room or vehicle
- condensation (vapor in air warmed or cooled to water droplets) could occur on the lens and/or inside
the DVD video camera/recorder. If condensation occurs, do not open the cover of disc or card insertion
block if possible. If condensation occurs on the lens, wipe it off with a soft, dry cloth. Even if the external
surface of DVD video camera/recorder has dried, condensation may remain inside: Turn the DVD
video camera/recorder off and leave it in a dry place for at least 1-2 hours before using it again.
Do not use the DVD video camera/recorder for a long uninterrupted period of time:
•
This DVD video camera/recorder cannot be used for a long time continuously as a surveillance
camera/monitor. If you use the DVD video camera/recorder for a long continuous period of time, the
temperature of DVD video camera/recorder could exceed a limit and the recording/playback
operation could be slowed down: In this case, turn it off and wait for a while before using it again.
camera/monitor. If you use the DVD video camera/recorder for a long continuous period of time, the
temperature of DVD video camera/recorder could exceed a limit and the recording/playback
operation could be slowed down: In this case, turn it off and wait for a while before using it again.
Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or
CARD ACCESS indicator is lit or blinking:
CARD ACCESS indicator is lit or blinking:
•
The ACCESS/PC or CARD ACCESS indicator is lit or
blinking to show that data is being written to disc or card, or
being read from it. At this time, do not do any of the
following, so as not to damage the data:
blinking to show that data is being written to disc or card, or
being read from it. At this time, do not do any of the
following, so as not to damage the data:
− Remove battery
− Disconnect AC adapter/charger
− Plug or unplug PC connection cable
− Remove disc or card
− Subject DVD video camera/recorder to severe vibrations
or impact.
− Violently open or close the LCD monitor
If you turn the DVD video camera/recorder off while the ACCESS/PC or CARD ACCESS indicator is
lit or blinking, turn it on again with the disc or card loaded in it: Repair of the disc or card will be executed
automatically (see page 165).
lit or blinking, turn it on again with the disc or card loaded in it: Repair of the disc or card will be executed
automatically (see page 165).
Do not wipe the DVD video camera/recorder case with benzene or thinner:
•
The coating of case could peel off or the case surface could deteriorate.
•
When using a chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
•
For optional accessories, observe the cautions and follow instruction manuals attached.
CARD
ACCESS
indicator
ACCESS
indicator
ACCESS/PC
indicator
indicator