Delfield mrr1s-s Guida Specifiche

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com

Approval _________________

Date____________________

Exterior: Cabinet front and shroud shall be 22-gauge 

stainless steel. Exterior sides shall be made of aluminum.  
Facing of shroud shall be easily removable without the 
use of tools.
Cabinet interior shall be anodized aluminum. Bottom & 
top of liner shall be die-stamped to provide radius corners 
and a recessed bottom. Base shall be fully insulated with 
high-density foamed in place polyurethane.
Interior shall have three epoxy-coated wire shelves per 
door section. Shelf support pilasters shall be heavy-duty 
with shelves adjustable at 1.0” (2.5 cm) increments. Unit 
will be mounted on 6” (15.24 cm) metal legs.

Doors: Solid doors shall have a 22-gauge stainless steel 

exterior & anodized aluminum interior liner. Doors shall 
be fully insulated with high density foamed in place 
polyurethane. Each door shall have two self-closing, cam-
lift style hinges. Doors shall be easily removable without 

use of tools. Door gaskets shall be magnetic snap-in 
style to allow simple replacement. Door handles shall be 
recessed.
• Please specify right or left hand hinging at time of 
order.

Mechanical controls shall be located behind a removable 
shroud facing. 

Refrigeration: Refrigeration system shall use R404A 

refrigerant. System shall be completely outside food zone 
to maximize internal storage space.  System shall utilize 
a dual diversion high flow air distribution system, and 
shall be  a high capacity design. Evaporator coils shall be 
coated to prevent corrosion. Cabinet shall maintain 34

0

F 

to 40

0

F (1

0

C to 4

0

C) internal temperature.

Single Voltage Models Only: Electrical connections 

shall be 115 volt, 60 hertz, single phase, with an 
eight ft. (2.4m) long electrical cord & plug as shown 
on reference chart. Cord & plug shall be wired to the 
junction box on top of the unit.

Dual Voltage Models Only: Electrical connections 

shall be 115/208-230 volt, 60 hertz, single phase, 
and must be hard-wired to the junction box located on 
top of the unit.

 

MRR1S-S 

Single section 

 

MRR2S-S 

Two section

 

Full height door 

 

Full height doors

 

MRR1SR-S 

Remote 

 

MRR2SR-S 

Remote

 

MRR1S-SH 

Single section 

 

MRR2S-SH 

Two section

 

Half height door 

 

Half height doors

 

MRR1SR-SH 

Remote 

 

MRR2SR-SH 

Remote

•  Shroud removes without tools, for easy condenser 

maintenance

•  Built in door locks
•  Durable stainless steel doors and shroud, for lasting good 

looks

•  New high-density foam insulation cuts energy costs
•  Big, easy grip handles are easy to find, don’t intrude into 

kitchen traffic

•  Attractive aluminum side panels are easy to clean and 

corrosion resistant

•  Heavy-duty hinges with stay open feature
•  Refrigeration system is located outside the food zone, more 

space for product storage

•  Mini watt door heaters eliminate condensation with 

minimal energy cost

•  Easy to read dial thermometer
•  Tri seal door gaskets lower energy costs with a unique 

insulating design

•  Epoxy coated shelves—corrosion resistant, 300-lb. 

capacity.  Flexible placement on 1” centers allows 
maximum storage

•  Aluminum interior stands up to food acids without 

corroding

•  Lots of interior storage space for the money
•  Rugged metal legs, adjustable to compensate for 

uneven floors

OPTIONS AND ACCESSORIES
 

Stainless steel exterior sides

 

Stainless steel interior

 

Stainless steel kick plate

 

Door and end laminate

 

Stainless steel exterior back

 

Digital thermometer

 

TXV

 

Chrome Shelves

 

Tray Slides

 

220/50/1 electrical

 

Electronic control

 

Stainless steel legs

 

Casters