Clavia electro 3 Guida Utente

Pagina di 27
On the Electro 3, press and hold Shift and the Split button .
4
This will activate the organ split mode, but since MIDI Split is set to On, 
the Electro 3’s keyboard will only play the upper part without being split . 
Press the Preset/Split button to cycle between the 1/Lo and the 
5
2/Up settings . 
Adjust the drawbars for the lower, external keyboard when the 1/Lo 
LED is lit and for the Electro 3’s keyboard when the 2/Up LED is lit .
The drawbars
The drawbars of the Nord Electro 3 are represented by buttons and 
LED graphs . This gives you a big advantage: when you change the 
program, the correct drawbar settings are recalled immediately and 
shown by the LEDs . 
The drawbars of Nord Electro 3 behave similar to their mechanical 
counterparts, i .e . with the B3 and VX models you “pull out” and “push 
in” the drawbars using the Drawbar buttons . The buttons are special in 
the way that they auto-increment/decrement the drawbar value when 
held . If you hold a Drawbar button the corresponding drawbar value will 
continue to change (within its range) until you release the button . The 
speed of the automatic change can be set in the System menu, read 
more about this on page 17 . 
While holding a Drawbar button, you can press its sibling button to 
 
momentarily auto-increment/decrement in the opposite direction.
Organ Presets 
The Drawbar buttons can be used to access 
17 different organ presets plus a Random 
setting (RND) for each of the three organ 
models . These presets contain the drawbar 
settings, the vibrato/chorus and the percus-
sion parameters .
Press Shift + the corresponding Drawbar button to select one of these 
presets . The Random function will generate a new random preset every 
time you activate it .
Store your own organ preset
Here is how to store your own organ preset:
Use the upper drawbar and lower drawbar buttons, and the 
1
vibrato/chorus and percussion sections to create the organ setting 
you want to store .
Press and hold Shift and the Store/Store Org . Preset button . 
2
The display will flash O . pr .
Setect a desired location to store by pressing one of the Organ 
3
Preset buttons . 
The display will show the selected preset number .
Confirm your intentions by pressing Store once more . 
4
This procedure may be aborted by pressing any button (except Store 
or one of the preset buttons) on the panel .
Organ presets can be managed using the Nord Sound Manager, 
 
M
read more about this on page 20.
Piano section
The Piano section of the Nord Electro 3 is 
divided into six different types; each type 
can contain several instrument models . 
You can freely add new piano instruments 
and samples via USB using the Nord 
Sound Manager utility (see “Nord Sound 
Manager” on page 20) .
Right out of the box, Nord Electro 3 fea-
tures a fine collection of carefully selected 
acoustic and electromechanical pianos, 
harpsichords and sampled instruments . 
A lot of effort was put in to ensure that 
the response and sound of the sampled 
instruments matches every nuance of the 
real article . Each piano instrument has 
been multi sampled in a vast amount of 
velocity levels . That’s one reason why they 
all sound and feel so authentic .
The Piano section also includes the ability 
to use samples from the Nord Sample 
Library, like e .g . the Mellotron sounds that 
have been licensed by Clavia .
Clavinet sound
On an original Clavinet D6 you can select different pick-up and filter 
combinations by pressing a number of rocker switches . This functional-
ity is very faithfully simulated in the Nord Electro 3, which means that 
you get all the possible original Clavinet D6 sound variations (plus an 
additional four) by selecting different pick-up and filter combinations . 
Here’s how it works:
Pick-up type
A Clavinet D6 has two separate pick-ups, one on the “neck” and one 
on the “bridge” . By selecting either one pick-up or both in different 
combinations you can alter the character of the sound quite drastically . 
When the Clavinet is selected in the Nord Electro 3, you use the Model 
button in the Piano Select section to select one of the four pick-up 
variations:
Pick-up Type Description
Clav Model 1 (CA) Only the “neck” pick-up; a warmer, less bright 
sound . 
Clav Model 2 (CB) Only the “bridge” pick-up; a bright sound . 
Clav Model 3 (DA) Both pick-ups on and in phase; a very full sound . 
Clav Model 4 (DB) Both pick-ups 180 degrees out of phase; the 
fundamental is almost cancelled out and the sound becomes thin .

5NordElEctro3rEfErENcE
| 13