Clavia electro 2 Guida Utente

K

EY

 

CLICK

 

CONTROL

On an original B-3 organ, the key click produced by the 
random contact bounces is actually an artifact. This arti-
fact later became quite desirable an effect amongst musi-
cians. In the Nord Electro 2 you can select the amount of 
key click that should be present in the organ sounds. The 
key click level is global for all organ sounds in the Nord 
Electro 2.

1. Hold down S

 and press the P

 8 but-

ton twice. The D

 reads ‘C.8’ where ‘C’ 

stands for ‘Click’ and ‘8’ for the current click 
level.

2. Select key click level by scrolling with the U

 buttons. ‘C.0’ means minimum key click level and ‘C.9’ maximum level.

3. Press any button (except for the S

 or U

 buttons) to exit.

O

UTPUT

 

ROUTING

 (

HARD

 

PAN

)

If you want to process your sound using external effects, 
it can be convenient to route Organ and Piano sounds to 
separate outputs of the Nord Electro 2. Note that the 
Output routing is not saved, so you will have to re-
configure after power off.

1. Hold down S

 and press the P

 8 but-

ton three times. The D

 reads ‘H.0’ where 

‘H’ stands for ‘Hard pan’ and ‘0’ that both Organ 
and Piano sounds are routed to L

 and 

 without separation.

2. Select ‘separate outputs’ by pressing the U

 button so the D

 reads ‘H.1’. ‘H.1’ 

means that Organ sounds will be output only through the L

 and Piano sounds only 

through the R

. Note that any stereo effect you apply to a sound internally will be in 

3. Press any button (except for the S

 or U

 buttons) to exit.