Clavia electro 2 Guida Utente

N

ORD

 E

LECTRO

 2 

REAR

 

PANEL

C

ONNECTIONS

• Make all connections before turning on your power amplifier!

• If you are using a Nord Electro 2 together with a MIDI keyboard, connect a MIDI cable from MIDI 

Out on the keyboard to MIDI I

 on the Nord Electro 2.

• All signal cables used with the Nord Electro must be shielded.

• The two audio outputs (L

 and R

) are line level and unbalanced. If you want the 

sum of the signals on one separate output only, use R

.

• If you connect the Nord Electro 2 in stereo to your audio equipment, you should use L

 in 

pair with R

. 

• If you choose the option to route Organ sounds and Piano sounds to a separate output each (see 

), the R

 is for the Piano sound and the L

 for the Organ sound.

C

ONNECTING

 

PEDALS

The Nord Electro 2 has three pedal inputs, one C

 input (for controlling Organ Swell or 

Wah-Wah), one S

 input (sustain) and one R

 input (for rotary speaker fast/

slow selection). Connect the pedals as shown in the figure below:

When connecting an expression-type pedal to the C

 input, you should use a stereo cable 

(Tip-Ring-Sleeve). Please note that the pedal must have a stereo output jack. The resistance range of the 
Control Pedal should be 0 to between 10 kOhm and 50 kOhm. Pedals like the Roland EV-5 and control/
expression pedals from Proel works well with the Electro 2. Control/Expression pedals from Yamaha have 
different characteristics and are not suitable for use with the Electro 2.